How about Used them:	

1.Please contact to the Power switch off ,checked power input,Hall,Throttle(Do not reverse the polarity),motor,and self-learn lines are connected
2.Turn Power On,If motor spins slowly,disconnect the self-learn line,Turn the throttle and the motor will speed up accordingly,Return throttle to zero.Calibration procedure complete.If Motor spins in reverse.disconnect the self-learn line once and reconnect it.The motor will change direction.Disconnect the self-learn line turn the throttle,and the motor will speed up accordingly.Return throttle to zero.Calibration procedure complete.	
3.If the controller funcation abnormally,Please cycle power and follow the above instruction again.Install in a well-ventilated location and insulate all connect.

    Fearures:
Suitable for electric bicycle&scooter,Mechanical or electric forklift ect
Features:Speed limit,Anti-thelf,EBS
Rated Voltage:36/48Volts
Rated Power:350W
Phase Angle:Slef-study
Throttle Voltage:1.1-4.2V
Brake Level:High/Low
Under Voltage Protection:31/41±0.5V
3Phase 60 or 120 degrees
Operating Condition:-40 to 80degrees
Size:10.5*7*3.5cm
 
Funcation:
1.Black-red-red                          Power Source	
2.Red-Yellow-Blue-Green-black   Motor Phase	
3.Yellow-Green-blue                    Hall Signals	
4.Gray                                         Metre Signals	
5.Black-red                                  Anti-thelf Power Source	
6.Yellow-Blue-Green                    Anti-thelf	
7.White-white                             Self-learn	
8.Pink-Pink                                Speed Limit	
9.Purple                                    Brake signale High	
10.Black-Blue with White          Brake signale Low         	
11.Red-Green-black                Throttle Signa